Xerox Phaser 7800 Uživatelský manuál stáhnout pdf (Strana 18)

Phaser 7800

Customer Support Page 18

PJL/PCL Dependencies/Caveats

Locate all PJL commands in the beginning of the file before the image data starts (PS or PCL).

To combine printer escape commands (not including PJL commands):

 The first two characters after the <esc> MUST be the same.

 All alpha characters MUST be lowercase, except the final terminating character.

 The commands are read left to right. Combine them in the order you wish them executed.

For example, print 5 copies (<ESC>&l5X) and use letter size (<ESC>&l2A) is combined as: <ESC>&l5x2A

In case of duplicate commands, the last one requested takes precedence.

The PJL SET COPIES command takes precedence over the PCL command (<Esc>&l#X) to determine number of

copies. In general, PJL commands takes precedence over PCL commands.

When printing a job with an odd number of pages and duplex front and back imaged covers, the printer always prints

on both sides of the front and back covers. The remaining pages are printed on the document body media type and

color with a blank page inserted to allow an image on both sides of the back cover.

When using the Blank Front or the Blank Front & Back Cover command, the Cover Media Size command is optional. If

the cover size command is not in the PDL, the printer assumes the cover media size is the same as the document

body.

Use one of the following methods to specify media selection:

 Describe the media attributes with size, color, and type to allow the device to select the matching source tray. If

this media description method is used, leave the tray source command out of the job, or set to Auto. If not, the

tray source command takes precedence over the tray selection capabilities of the device.

 Indicate the tray source for the job. If the tray source command is used, the system automatically defaults paper

type to the defined SYSTEM DEFAULT unless specified otherwise. This prevents inadvertent use of special paper

types. To override, include a paper type specification of UNSPECIFIED in the job.

DSC/PS Dependencies/Caveats

All %% commands (DSC comments) must be in the first 64KB of the job.

The following media sizes do not print duplex: A6, B6, 5 x 7" Postcard (4.5 x 6"), envelopes and any custom sized

media where the page width is less than 5.5". A request to duplex these media sizes is ignored.

Jobs that indicate Transparencies, Labels, Envelopes or Tab-Stock do not support duplex commands. The duplex print

request is ignored when any of these media types are used.

When printing an odd number of pages in a document with duplex front and back imaged covers, the printer always

prints on both sides of the front and back covers. The remaining pages print on the document body media type and

color with a blank page inserted to allow an image on both sides of the back cover.

When using the Blank Front or the Blank Front and Back Cover command, the Cover Media Size command is optional.

If the Cover Media Size command is not in the PDL, the printer assumes the cover media size as that of the document

body.

Use one of the following methods to specify media selection:

 Describe the media attributes with size, color, and type to allow the device to select the matching source tray. If

this media description method is used, leave the tray source command out of the job, or set to Auto. If not, the

tray source command takes precedence over the tray selection capabilities of the device.

 Indicate the tray source for the job. If the tray source command is used, the system automatically defaults paper

type to the defined SYSTEM DEFAULT unless specified otherwise. This prevents inadvertent use of special paper

types. To override, include a paper type specification of UNSPECIFIED in the job.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Komentáře k této Příručce

Žádné komentáře

Xerox Phaser 7800 Uživatelský manuál Strana 18

Komentáře k této Příručce

Související produkty a manuály pro Tisk a skenování Xerox Phaser 7800