Xerox CX Uživatelský manuál stáhnout pdf (Strana 29)

Notes:

●

If at any stage the scanning has not been completed properly, click

Reset and scan again.

●

If an error occurs while you are scanning the chart, an alert message

appears. Click OK and re-scan the charts.

6. To save the calibration table, do one of the following:

●

Select As default name to automatically name the

calibration table using the screening method, meda type,

and date.

●

Select Save as to type your own name.

Note: It is strongly recommended that you include the media type, weight,

and screening method in the calibration table file name.

7. Click Finish.

Mapping jobs to calibration tables

When you create a calibration table, the calibration table is based

on the media type, paper weight, and screening method that you

selected during the calibration process. Any job that has the

specific media type, paper weight, and screening method that you

selected, will automatically be mapped or linked to this calibration

table.

In the Job Parameters window, under Color > Calibration, the

Linked option is selected by default.

When you send your job to print, because the calibration table is

linked to the job, it is automatically used when the job is printed.

Žádné komentáře

Xerox CX Uživatelský manuál Strana 29