Xerox Documate 632 Uživatelský manuál stáhnout pdf (Strana 112)

DocuMate 632 Scanner User’s Guide 107

Maintenance

Replacing the Roller Assembly

After extended use, the roller may wear out and will need to be

replaced. It is a user-replaceable part and can be ordered. See the

section “Xerox DocuMate 632 Scanner Parts List” on page 118 for

the part number.

A worn roller can cause documents to feed in at an angle, multiple

pages to feed at the same time, or not grab pages at all as the

roller slips on the page. If standard maintenance of cleaning the

scanner and replacing the ADF pad assembly does not resolve

paper feed issues, it may be time to replace the scanner.

Please note that you cannot accurately determine if the roller has

worn out if the roller has not been cleaned first. Excessive dust on

the roller can make it appear worn and will be smooth to the touch.

You can take the roller out of the scanner to clean and examine it

before making the decision to replace the roller.

To remove the roller assembly:

1. Open the ADF cover.

Note that opening the ADF cover automatically disengages the

toothed gear on the right side of the roller so it can be removed.

The roller assembly fits in a channel in the ADF cover. You can

identify the roller assembly by its orange lock flange.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 132 133

Žádné komentáře

Xerox Documate 632 Uživatelský manuál Strana 112