Xerox DocuMate 510 Uživatelská příručka stáhnout pdf (Strana 22)

DocuMate 510 Scanner User’s Guide 17

Installation

3. Turn on the power switch, located on the back of the scanner to

the left of the power port.

The Ready light comes on indicating that the scanner is

receiving power.

If you are using Windows XP Service Pack 2, and have

plugged the USB cable into a USB 1.1 port, an information

bubble may open explaining that “A HI-SPEED USB device is

plugged into a non-HI-SPEED USB hub”. Plug the USB cable

into a USB 2.0 port (if available) or just disregard the message.

If you leave it plugged into the USB 1.1 port, your scanner may

scan a bit slower.

Your computer then recognizes that a scanner has been

plugged into the USB port and automatically loads the

appropriate software to run the scanner.

Do not proceed until you receive a message that your computer

has found the new hardware, or updated the driver database. If

your computer is running Windows XP or Windows Vista, you

will see one of the following messages.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 134 135

Žádné komentáře

Xerox DocuMate 510 Uživatelská příručka Strana 22