Xerox 152 Uživatelská příručka stáhnout pdf (Strana 115)

Maintenance

110 DocuMate 152 Scanner User’s Guide

Status Light Troubleshooting Codes

The status light indicates the current state of the scanner. A green

status light indicates the normal state of the scanner. A red status

light indicates that there is a hardware issue. Descriptions of the

most common patterns are listed below.

Normal Operation

• Blinking green: indicates the scanner is waking up from power

saving and preparing to scan.

• Steady green: indicates the scanner is ready to scan.

Error Codes

If your scanner experiences hardware problems, the status light

will blink red, and the LED flashes an “E” and then the error code

number.

The E-code number indicates what the hardware issue is. Use the

table listed on the next page as a reference for resolving hardware

issues.

In all cases you should turn off your scanner and check your

scanner setup. Open the scanner and make sure your input tray is

fully seated in the scanner casing, make sure your ADF pad is

securely snapped in place, verify the connections to the PC and

wall.

The LED blinks back and forth

between “E” and the error code

number (such as 8).

The red light flashes the

number of times as the error

code (8 in this example).

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 129 130

Žádné komentáře

Xerox 152 Uživatelská příručka Strana 115